{"title":"Glensound - Amplifiers","description":"","products":[{"product_id":"virgil-dante-studio-headphone-amplifier","title":"VIRGIL - Dante studio headphone amplifier","description":"Virgil was the Roman poet who guided Dante through Hell and Purgatory; the Glensound Virgil is a clever little headphone amplifier for providing crystal clear audio into studio \u0026amp; broadcast headphones.\u003cbr\u003e\n\u003cbr\u003e\nPackaged in a small \u0026amp; robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users' headphones.\u003cbr\u003e\n\u003cbr\u003e\nThe Virgil encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).\u003cbr\u003e\n\u003cbr\u003e\nVirgil receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume.\u003cbr\u003e\n\u003cbr\u003e\nThree mounting holes are supplied to enable the Virgil to be mounted underneath a studio desk in a suitable location for the user's headphones. Needing just 1 single network cable to carry both power \u0026amp; audio to the Virgil makes installation very simple.\u003cbr\u003e\n\u003cbr\u003e\nAs well as being suitable for low \u0026amp; high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones \u0026amp; mono earpieces, making the Virgil suitable for driving television presenters' ear pieces.\u003cbr\u003e\n\u003cbr\u003e\nFeatures \u003cbr\u003e\n•\tDante audio input\u003cbr\u003e\n•\tStereo headphone amplifier\u003cbr\u003e\n•\tCan be used with mono earpieces\u003cbr\u003e\n•\tUnder desk mounting\u003cbr\u003e\n•\tSmall \u0026amp; robust\u003cbr\u003e\n•\tPowered by PoE\u003cbr\u003e\n•\t6.35 \u0026amp; 3.5mm headphone outputs\u003cbr\u003e\n•\tUp to 96K\/ 24 bit audio","brand":"Glensound - Amplifiers","offers":[{"title":"VIRGIL \/ https:\/\/www.glensound.co.uk\/product-details\/virgil\/ \/ https:\/\/www.glensound.co.uk\/assets\/library\/6086bb23be21a-Virgil%20V3.pdf","offer_id":43229081796696,"sku":null,"price":787.64,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/2671\/9576\/files\/ContainerBridge_0c232d3b-8228-497c-b027-5d56a93a53de.jpg?v=1758618062"},{"product_id":"virgil-bc-stereo-dante-headphone-amp-with-belt-clip","title":"VIRGIL BC - Stereo Dante Headphone Amp With Belt Clip","description":"Virgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil is a clever little headphone amplifier for providing crystal clear audio into studio \u0026amp; broadcast headphones.\u003cbr\u003e\n\u003cbr\u003e\nPackaged in a small \u0026amp; robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users headphones.\u003cbr\u003e\n\u003cbr\u003e\nThe Virgil encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).\u003cbr\u003e\n\u003cbr\u003e\nVirgil receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume.\u003cbr\u003e\n\u003cbr\u003e\nThree mounting holes are supplied to enable the Virgil to be mounted underneath a studio desk in a suitable location for the users headphones. Needing just 1 single network cable to carry both power \u0026amp; audio to the Virgil makes installation very simple.\u003cbr\u003e\n\u003cbr\u003e\nAs well as being suitable for low \u0026amp; high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones \u0026amp; mono earpieces, making the Virgil suitable for driving television presenters ear pieces.\u003cbr\u003e\n\u003cbr\u003e\nFeatures \u003cbr\u003e\n•\tDante audio input\u003cbr\u003e\n•\tStereo headphone amplifier\u003cbr\u003e\n•\tCan be used with mono earpieces\u003cbr\u003e\n•\tUnder desk mounting\u003cbr\u003e\n•\tPowered by PoE\u003cbr\u003e\n•\t6.35 \u0026amp; 3.5mm headphone outputs\u003cbr\u003e\n•\tIncludes belt clip\u003cbr\u003e\n","brand":"Glensound - Amplifiers","offers":[{"title":"VIRGIL BC \/ https:\/\/www.glensound.co.uk\/product-details\/virgil-bc\/ \/ https:\/\/www.glensound.co.uk\/assets\/library\/5ea0082f2b008-Virgil%20V2%20WEB%20Brochure.pdf","offer_id":43229081829464,"sku":null,"price":810.47,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/2671\/9576\/files\/ContainerBridge_903322f5-b17b-4d44-ba58-281335684b63.jpg?v=1758618066"},{"product_id":"dark8mai-mkii-8-channel-mic-amp-to-dante-stagebox-win10-remote-control-xlr-ins","title":"DARK8MAI MKII - 8 Input Mic Amp for Dante\/ AES67 XLR","description":"The DARK8MAI MKII (Microphone Analogue Input) is a very powerful Dante\/ AES67 network audio interface, in a robust stage box\/ throw down style.  It has 8 off low noise mic\/line inputs which are remotely controlled by a Windows 10 app. The outputs of the microphone amplifiers are transmitted on a fully redundant Dante\/ AES67 network interface.\u003cbr\u003e\n\u003cbr\u003e\nHaving 8 off low noise high quality microphone inputs makes the DARK8MAI MKII perfect for transporting audio circuits from a stage or a pitch side position to a mixer or other location within an audio network.\u003cbr\u003e\n\u003cbr\u003e\nThe rugged design, PoE powering \u0026amp; remote control facility of the unit means that it can easily be placed and left unattended wherever audio sources are required.\u003cbr\u003e\n\u003cbr\u003e\n•\tEight Audio Inputs\u003cbr\u003e\nThe DARK8MAI MKII has 8 audio inputs. Each input is on its own Neutrik 3 pin XLR socket and each input can be set to accept line or mic level inputs. Clever internal circuitry even changes the input impedance to correctly match the input type.\u003cbr\u003e\n\u003cbr\u003e\n•\tLow Noise Mic Amps\u003cbr\u003e\nThe very best low noise \u0026amp; distortion microphone amplifier chipsets by Profusion are used in our very carefully designed pre-amp. The design of the pre-amp took our Chief Design Engineer over 3 months to develop and tailor to provide crystal clear sound unaltered by unwanted characteristics.\u003cbr\u003e\n\u003cbr\u003e\n•\tMic\/Line\/Phantom Power\u003cbr\u003e\nEach of the eight inputs can be individually switched to accept either a mic or line level input.  The mic input can also have 48 Volt phantom power turned on\/ off. Input selection and phantom power settings are enabled on the Windows 10 app.\u003cbr\u003e\n\u003cbr\u003e\n•\tHigh Quality Analogue To Digital Converters\u003cbr\u003e\nAs well as the best microphone amplifiers, the very best widest range analogue to digital converters (ADC) currently available are used to make sure the digital audio on your network is as good as it possibly can be. The filter settings of the ADC can even be changed via the app.\u003cbr\u003e\n\u003cbr\u003e\n•\tWindows 10 App For Remote Control\u003cbr\u003e\nGlenController, our free Windows 10 app, provides full remote control of the DARK8MAI MKII. It allows switching of input types, gain control, level monitoring and more.\u003cbr\u003e\n\u003cbr\u003e\n•\tNetwork Interface\u003cbr\u003e\nThere are 4 network interfaces on the DARK8MAI MKII. There are 2 x Neutrik Ethercon (RJ45) connectors and there are also 2 x SFP slots for customers to fit their own preferred fibre interfaces.\u003cbr\u003e\n\u003cbr\u003e\n•\tRedundant Network Interface\u003cbr\u003e\nWhen using the Dante protocol it is possible to set the DARK8MAI MKII to have a fully redundant network interface whereby a completely glitch free automatic redundant audio network link is provided across 2 of the network interfaces.\u003cbr\u003e\n\u003cbr\u003e\n•\tPower\u003cbr\u003e\nDARK8MAI MKII can be powered from independent sources to provide a redundant power option. Each copper RJ45 network socket can accept PoE (this means that just 1 cable can carry power and audio data to\/ from the unit). A DC input is also provided for powering the unit from an external DC source if no PoE is available.\u003cbr\u003e\n","brand":"Glensound - Amplifiers","offers":[{"title":"DARK8MAI MKII \/ https:\/\/www.glensound.co.uk\/product-details\/dark8mai-mkii\/ \/ https:\/\/www.glensound.co.uk\/assets\/library\/60744276d8de6-Dark8MAI%20MKII%20v2.pdf","offer_id":43230836129880,"sku":null,"price":4486.13,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/2671\/9576\/files\/ContainerBridge_3cb87e85-e593-4fe8-88e9-783260da15a0.jpg?v=1758682847"},{"product_id":"dark1616m-network-audio-analogue-and-aes-interface-with-remote-mic-amps","title":"DARK1616M - Network Audio Analogue and AES Interface With Remote Mic Amps","description":"The DARK 1616M is an audio interface that provides connections to a Dante or AES67 IP network.\u003cbr\u003e\n\u003cbr\u003e\nInputs \u0026amp; Outputs\u003cbr\u003e\nThere are 16 digital inputs and 16 digital outputs, available on 8 x AES connections.  There are also 16 analogue inputs and 16 analogue outputs, available in parallel to the digital.  The analogue and digital outputs are always available, and the inputs work either on AES input priority or can be selected via the control app.\u003cbr\u003e\n\u003cbr\u003e\nThe AES3 inputs have sample rate converters and can accept input frequencies up to 192kHz.  The incoming AES3 circuit is always sample rate converted to match the Dante network frequency.  The AES3 outputs are locked to the sample frequency of the Dante network.\u003cbr\u003e\n\u003cbr\u003e\nConnections\u003cbr\u003e\nFor ease of cabling, audio I\/O is presented on D25 sockets to the AES59 standard (Tascam wiring convention) for which there are a number of reasonably priced break out cables available from multiple suppliers.\u003cbr\u003e\n\u003cbr\u003e\nRemote Mic Amps\u003cbr\u003e\nThe analogue inputs are switchable between mic, line and 48V phantom power.  These are controllable across the network via the Dark Controller Windows 10 app.  This allows remote control by an engineer of the input selection, gain adjust and input on\/off control.  A meter is also provided for each input on the app, to monitor the input level and help with setting the gain.\u003cbr\u003e\n\u003cbr\u003e\nNetwork Interface\u003cbr\u003e\nBeing designed for resilient broadcast applications the DARK1616M features both redundant power supplies and redundant Dante network links with link status GPOs (general purpose outputs (solid state relays)). Both primary and secondary network links are provided with both magnetic (copper RJ45) and fibre (SFP) interface connections. The Dante system itself provides a completely transparent redundant link system which means that if the DARK1616M lost its primary link circuit the secondary link would automatically take over with no loss of audio.\u003cbr\u003e\n\u003cbr\u003e\nThe primary and secondary network interfaces are routed internally via a network switch.  It is possible to set this switch to work as a traditional network switch instead of the default redundant mode.  This means that there would be just one link to the Dante network, and the other connections of the switch could have other Dante or network devices connected to them. As with all Dante devices, once set up, DARK1616 units can be directly connected with each other with no external network hardware.\u003cbr\u003e\n\u003cbr\u003e\nAlarms\u003cbr\u003e\nOn the front panel 4 bright LEDs indicate the status of the 2 power supplies and the primary and secondary local network links. In parallel to these 4 indicating LEDs there are 4 solid state relay outputs for connecting to external alarm systems for failure notification of a power supply or link fault.   ","brand":"Glensound - Amplifiers","offers":[{"title":"DARK1616M \/ http:\/\/www.glensound.co.uk\/product-details\/dark1616m\/ \/ https:\/\/www.glensound.co.uk\/assets\/library\/607e883bac099-Dark%201616M%20v3.pdf","offer_id":43231064719448,"sku":null,"price":7385.57,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/2671\/9576\/files\/ContainerBridge_8ca805c2-3d9e-42cf-b240-022d64006564.jpg?v=1758694062"},{"product_id":"aoip-2m-2-channel-mic-amp-dante-aes67","title":"AoIP-2M - 2 Channel Mic Amp Dante\/AES67","description":"AoIP2M is packaged in small \u0026amp; rugged format and designed for outside broadcast, theatre and location applications.\u003cbr\u003e\n\u003cbr\u003e\nIt has 2 microphone inputs with 48V phantom power switch and gain control. Designed to easily and quickly interface in to the Dante Network.\u003cbr\u003e\nPoE power means that only a single cable is needed to connect to the network to carry both audio and power.\u003cbr\u003e\n\u003cbr\u003e\nRobust construction with a simple interface.\u003cbr\u003e\n\u003cbr\u003e\nThe network can operate from 44.1-96 kHz using Dante, or 48kHz on AES67.\u003cbr\u003e\n\u003cbr\u003e\n•\tThe AoIP2M provides 2 balanced microphone inputs on to the Dante®\/ AES67 audio network\u003cbr\u003e\n•\tSimple PPM meter allows easy input level adjustment\u003cbr\u003e\n•\tSwitchable Phantom power\u003cbr\u003e\n•\tFixing holes in the top and bottom plates. This allows temporary fixing with cables ties or a more permanent solution with bolts or screws.\u003cbr\u003e\n\u003cbr\u003e\nFeatures\u003cbr\u003e\n•\t2 analogue mic\/line inputs on XLR\u003cbr\u003e\n•\tSelectable 48v\u003cbr\u003e\n•\tIndependent gain controls\u003cbr\u003e\n•\tPOE \u0026amp; 12VDC\u003cbr\u003e\n•\tUp to 96k\/24bit with Dante\u003cbr\u003e\n•\tLockable Neutrik Ethercon R45","brand":"Glensound - Amplifiers","offers":[{"title":"AoIP-2M \/ https:\/\/www.glensound.co.uk\/product-details\/aoip2m\/ \/ https:\/\/www.glensound.co.uk\/assets\/library\/62d7dd106dc08-AoIP2M%20Brochure%20V1.pdf","offer_id":43231065374808,"sku":null,"price":1061.6,"currency_code":"NZD","in_stock":true}]},{"product_id":"dark8maip-mkii-8-input-mic-amp-for-dante-aes67-phoenix","title":"DARK8MAIP MKII - 8 Input Mic Amp for Dante\/ AES67 Phoenix","description":"The DARK8MAIP (Microphone Analogue Input with phoenix connectors) is a very powerful Dante\/ AES67 network audio interface, in a robust stage box\/ throw down style.  It has 8 off low noise mic\/line inputs which are remotely controlled by a Windows 10\/11 app. The outputs of the microphone amplifiers are transmitted on a fully redundant Dante\/ AES67 network interface.\u003cbr\u003e\n\u003cbr\u003e\nHaving 8 off low noise high quality microphone inputs makes the DARK8MAIP perfect for transporting audio circuits from a stage or a pitch side position to a mixer or other location within an audio network.\u003cbr\u003e\n\u003cbr\u003e\nThe rugged design, PoE powering \u0026amp; remote control facility of the unit means that it can easily be placed and left unattended wherever audio sources are required.\u003cbr\u003e\n\u003cbr\u003e\nEight Audio Inputs\u003cbr\u003e\nThe DARK8MAI MKII has 8 audio inputs. Each input is made available by integrator friendly phoenix connectors and each input can be set to accept line or mic level inputs. Clever internal circuitry even changes the input impedance to correctly match the input type.\u003cbr\u003e\n\u003cbr\u003e\nLow Noise Mic Amps\u003cbr\u003e\nThe very best low noise \u0026amp; distortion microphone amplifier chipsets by Profusion are used in our very carefully designed pre-amp. The design of the pre-amp took our Chief Design Engineer over 3 months to develop and tailor to provide crystal clear sound unaltered by unwanted characteristics.\u003cbr\u003e\n\u003cbr\u003e\nMic\/Line\/Phantom Power\u003cbr\u003e\nEach of the eight inputs can be individually switched to accept either a mic or line level input.  The mic input can also have 48 Volt phantom power turned on\/ off. Input selection and phantom power settings are enabled on the Windows 10 app.\u003cbr\u003e\n\u003cbr\u003e\nHigh Quality Analogue To Digital Converters\u003cbr\u003e\nAs well as the best microphone amplifiers, the very best widest range analogue to digital converters (ADC) currently available are used to make sure the digital audio on your network is as good as it possibly can be. The filter settings of the ADC can even be changed via the app.\u003cbr\u003e\n\u003cbr\u003e\nWindows 10\/11 App For Remote Control\u003cbr\u003e\nGlenController, our free Windows 10\/11 app, provides full remote control of the DARK8MAIP. It allows switching of input types, gain control, level monitoring and more.\u003cbr\u003e\n\u003cbr\u003e\nNetwork Interface\u003cbr\u003e\nThere are 4 network interfaces on the DARK8MAIP. There are 2 x Neutrik Ethercon (RJ45) connectors and there are also 2 x SFP slots for customers to fit their own preferred fibre interfaces.\u003cbr\u003e\n\u003cbr\u003e\nRedundant Network Interface\u003cbr\u003e\nWhen using the Dante protocol it is possible to set the DARK8MAIP to have a fully redundant network interface whereby a completely glitch free automatic redundant audio network link is provided across 2 of the network interfaces.\u003cbr\u003e\n\u003cbr\u003e\nPower\u003cbr\u003e\nDARK8MAIP can be powered from independent sources to provide a redundant power option. Each copper RJ45 network socket can accept PoE (this means that just 1 cable can carry power and audio data to\/ from the unit). A DC input is also provided for powering the unit from an external DC source if no PoE is available, on a locking4 pin XLR.","brand":"Glensound - Amplifiers","offers":[{"title":"DARK8MAIP MKII \/ https:\/\/www.glensound.co.uk\/product-details\/dark8maip\/ \/ null","offer_id":43231065473112,"sku":null,"price":4337.74,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/2671\/9576\/files\/ContainerBridge_06f800b4-1245-4279-80f4-d7b3218a7a7c.jpg?v=1758694069"},{"product_id":"darkdawn-1616m-16-in-16-out-analogue-interface-with-front-panel-control","title":"DARKDAWN 1616M - 16 in 16 out, analogue interface, with front panel control.","description":"This is the first of a new generation of the industry standard, DARK Dante\/AES67\/Ravenna interfaces. The DARK DAWN range of interfaces are multichannel analogue and AES input\/output devices intended to be installed in a studio setting where front panel operation and appearance is important.\u003cbr\u003e\n\u003cbr\u003e\nINPUT\/OUTPUT\u003cbr\u003e\nThe DARK DAWN 1616M has 16 analogue inputs, and 16 analogue outputs. The inputs are mic\/line\/ 48v switchable.  These are available on the rear panel via DB25 connectors.\u003cbr\u003e\n\u003cbr\u003e\nThe 16 mic amplifiers have been carefully designed to allow gain control with minimum impact to noise levels.  The circuits are very low noise, using high specification digital converters, and have very high headroom.\u003cbr\u003e\n\u003cbr\u003e\nFRONT PANEL CONTROL\u003cbr\u003e\nChannel gain can be adjusted directly from the front panel.  This can be the level of the incoming mic\/line level audio or the output levels of the channels coming from the network.  The DARKDAWN 1616M uses front end mic gain and not digital mic gain.\u003cbr\u003e\n\u003cbr\u003e\nLEVEL METERING\u003cbr\u003e\nEach channel has a permanent 4 segment LED to indicate level.  When a channel is selected for adjustment it is also highlighted on the 18 segment main meter for fine level adjust.\u003cbr\u003e\n\u003cbr\u003e\nFRONT PANEL\u003cbr\u003e\nThe front LED panel is machined from a single block of aluminium with no screwheads or connectors visible. It includes 16 individual channel meters, a single hi-res meter for setting individual channel level and a 1\/4” headphone socket for the monitoring of all input or output channels. Loss of network or power supply is reported by GPO.\u003cbr\u003e\n\u003cbr\u003e\nREMOTE CONTROL\u003cbr\u003e\nThe DARKDAWN 1616M can be controlled via GlenController or via any compatible .json application.  The control command list is available on request.\u003cbr\u003e\n\u003cbr\u003e\nNETWORK INTERFACE\u003cbr\u003e\nThe network interface is available with primary and secondary connections on both copper Ethernet and vis SFP fibre slots.  When not in redundant mode, these connections can operate as a 4 port hub.\u003cbr\u003e\n\u003cbr\u003e\nALARMS\u003cbr\u003e\nAlarm outputs are available on Phoenix connectors.  These will offer a closed contact for loss of a network connection or loss of a power supply.\u003cbr\u003e\n\u003cbr\u003e\nPOWER SUPPLIES\u003cbr\u003e\nPower is from twin multimode AC supplies on IEC connections.  The power supplies use load sharing for further extending the lifespan.","brand":"Glensound - Amplifiers","offers":[{"title":"DARKDAWN 1616M \/ https:\/\/www.glensound.co.uk\/product-details\/darkdawn-1616m\/ \/ null","offer_id":43231065669720,"sku":null,"price":8275.94,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/2671\/9576\/files\/ContainerBridge_151bb4fd-0afa-4c3d-87f9-c146a828d73f.jpg?v=1758694073"},{"product_id":"aoip22m-two-channel-dante-mic-amp-with-2-channel-return","title":"AoIP-22M - Two Channel Dante Mic Amp With 2 Channel Return","description":"The AoIP22M is a rugged unit, designed for broadcast, theatre and location applications. It can be used as a 2 input, 2 output device between analogue audio and Dante\/AES67 network audio.\u003cbr\u003e\nThe AoIP22M can also be used as a 2 channel mic amp into Dante\/AES67 with 2 analogue return channels from the network. PoE power means that only a single cable is needed to connect to the network to carry both audio and power. USB C power is also available for plug top USB supplies or using USB power bricks.\u003cbr\u003e\nThe network can operate from 44.1-96 kHz using Dante, or 48kHz on AES67.\u003cbr\u003e\n\u003cbr\u003e\nMic or Line Inputs\u003cbr\u003e\nThe two analogue inputs are on XLR connections and can be switched independently between mic or line level. 48v phantom power can be selected separately per input, and is indicated as active on the front panel.\u003cbr\u003e\n\u003cbr\u003e\nSecure Gain Adjusts\u003cbr\u003e\nEach input has the gain adjust on a small, spring loaded pot. Pushing it in releases it into the adjust position, and when the level is set, it can be pushed back flush to the front panel to avoid accidental adjustment.\u003cbr\u003e\n\u003cbr\u003e\n7 Segment PPM Meters\u003cbr\u003e\nEach input has a three colour, 7 LED PPM meter to help with the correct setting of input gain level.\u003cbr\u003e\n\u003cbr\u003e\nAdjustable Line Up Levels For Worldwide Standards\u003cbr\u003e\nOutput levels can be set with different firmware to be -18dBfs, -20dBfs, or -24dBfs.\u003cbr\u003e\nThe AoIP22M is digitally controlled. This allows us to have additional functionality that can be easily selected with the front panel switches. The switch function is detailed on the top panel as shown above.\u003cbr\u003e\n\u003cbr\u003e\nDante Mic Amp \u0026amp; Analogue Mic Amp\u003cbr\u003e\nThe output of each mic amp can be separately selected in two modes of operation:\u003cbr\u003e\n- Mic In\u003cbr\u003e\nIn this mode the output is the line level of the mic input. In other words, the channel is operating as a normal analogue microphone amplifier.\u003cbr\u003e\n- Dante\u003cbr\u003e\nIn this mode the output is the line level return audio from the Dante network.\u003cbr\u003e\n\u003cbr\u003e\n3 x High Pass Filter (HPF) Settings\u003cbr\u003e\nA high pass filter is selectable on each input channel and can be set at 20Hz, 30Hz or 60Hz. This is particularly useful when the AoIP22M is being used as a mic amp as it reduces the audio level below the filter point.\u003cbr\u003e\n\u003cbr\u003e\n3 x Compressor Settings (applicable in mic and line mode)\u003cbr\u003e\n- Off\u003cbr\u003e\nClean input with no compressor.\u003cbr\u003e\n- Soft\u003cbr\u003e\nWhen set to ‘soft’ the AoIP22M uses the Glensound Referee compressor. The Referee compressor does not affect the overall dynamics of the input like a traditional compressor. It only becomes active as the input signal approaches clipping, at which point a progressively curved compressor is applied. The compression gets harder and harder up to the clip point to prevent clipping from occurring.\u003cbr\u003e\n- Hard\u003cbr\u003e\nA hard compressor at a ratio of 4:1.\u003cbr\u003e\n\u003cbr\u003e\nEthernet Connection\u003cbr\u003e\nHalo EtherCON\u003cbr\u003e\n\u003cbr\u003e\nThe AoIP22M uses the latest Neutrik Halo EtherCON connector for the network connection. This is a standard XLR size and allows the connection of standard RJ45 network cables, as well as the more secure locking EtherCON plugs.\u003cbr\u003e\nThe outer ring of the EtherCON shows power and data traffic via its LED ring, without the need for separate LED indicator lights.\u003cbr\u003e\n\u003cbr\u003e\nPower Options\u003cbr\u003e\n- Power Over Ethernet (PoE)\u003cbr\u003e\nThe AoIP22M can be powered via its network connection when connected to a PoE switch. It can also receive power from a mid span PoE injector if the switch being used does not have PoE.\u003cbr\u003e\n- USB C\u003cbr\u003e\nA 5V, 3A USB C input can also power the AoIP22M. This can be via a USB C plug top power supply, a PC, or a USB power bank, making the AoIP22M truly portable.\u003cbr\u003e\n\u003cbr\u003e\nThe AoIP22M Case\u003cbr\u003e\nTwo Part Extruded Enclosure\u003cbr\u003e\nUsing an extruded aluminium enclosure for the body of the AoIP22M makes it extremely strong and resistant to knocks and crush damage.\u003cbr\u003e\n\u003cbr\u003e\nCustom Made End Bumpers\u003cbr\u003e\nThe end bumpers were custom made to provide the functionality that is expected from small Glensound units:\u003cbr\u003e\n- Protection\u003cbr\u003e\nAs the end bumpers are oversized, they provide a high degree of protection for all corners of the unit should it be dropped.\u003cbr\u003e\n- Standing\u003cbr\u003e\nThe bumpers mean that the AoIP22M can stand flat on its end if required.\u003cbr\u003e\n- Mounting\u003cbr\u003e\nThe AoIP22M provides fixing holes on the corners to allow mounting underdesks or on the inside of racks. These mounting holes are also often used as cable tie down points for easy temporary fixing.","brand":"Glensound - Amplifiers","offers":[{"title":"AoIP-22M \/ https:\/\/www.glensound.co.uk\/product-details\/aoip22m\/ \/ null","offer_id":43231065800792,"sku":null,"price":1244.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/2671\/9576\/files\/ContainerBridge_4f6851b4-f5fd-4864-a0b7-097b39ac41c5.jpg?v=1758690106"},{"product_id":"virgil-ob-stereo-outside-broadcast-headphone-amplifier","title":"VIRGIL OB - Stereo Outside Broadcast headphone amplifier","description":"Virgil OB receives 2 x audio circuits from a Dante \/ AES67 network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume of the headphones.\u003cbr\u003e\n\u003cbr\u003e\nThe 2 incoming audio circuits are also presented on a pair of balanced analogue audio XLRs on the rear of the unit. A switch on the side of the unit sets these 2 outputs to be post or pre fade of the front panel level control.\u003cbr\u003e\n\u003cbr\u003e\nThe Virgil OB is housed in a robust but lightweight aluminium casing that has been proven to  withstand the rigours of life on the road. It also features a hardwearing beltclip allowing the unit to be quickly and securely attached to both people and infrastructure.\u003cbr\u003e\n\u003cbr\u003e\nAs well as being suitable for low \u0026amp; high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones \u0026amp; mono earpieces, making the Virgil OB suitable for driving television presenters ear pieces.\u003cbr\u003e\n\u003cbr\u003e\nVirgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil OB is a clever little headphone amplifier for providing crystal clear audio into studio \u0026amp; broadcast headphones.\u003cbr\u003e\n\u003cbr\u003e\nPackaged in a small \u0026amp; robust format and designed for outside broadcast \u0026amp; theatre applications wherever a headphone circuit or analogue output is required, the Virgil OB provides a simple interface between Dante \/ AES67 network audio systems and users headphones or other analogue audio equipment.\u003cbr\u003e\n\u003cbr\u003e\nThe Virgil OB encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).\u003cbr\u003e\n","brand":"Glensound - Amplifiers","offers":[{"title":"VIRGIL OB \/ https:\/\/www.glensound.co.uk\/product-details\/virgil-ob\/ \/ https:\/\/www.glensound.co.uk\/assets\/library\/5ea0084710b20-Virgil%20OB%20V2%20WEB%20Brochure.pdf","offer_id":43231213125720,"sku":null,"price":947.45,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/2671\/9576\/files\/ContainerBridge_2f04cfda-8e65-4dbf-ba1d-40b196268218.jpg?v=1758697313"},{"product_id":"gs-mca001-battery-operated-mic-amp","title":"GS-MCA001 - Battery Operated Mic Amp","description":"Mic Amplifiers\u003cbr\u003e\n\u003cbr\u003e\nThe Glensound GS-MCA001 is a portable, battery powered microphone preamplifier with limiter. It's lightweight, small and rugged construction makes it ideal for outside broadcast and film production. As well as offering a high quality compressor\/ limiter circuit (with bypass) it also has selectable LF cuts, 48 volts phantom power and a rotary stepped gain control. A belt clip is included for hands free operation and the single PP3 9 Volt battery offers good operational life. Manufactured in Glensound's UK factory using high quality components \u0026amp; trusted manufacturing techniques the GS-MCA001 will give many years of reliable performance.","brand":"Glensound - Amplifiers","offers":[{"title":"GS-MCA001 \/ null \/ null","offer_id":43245349404760,"sku":null,"price":764.81,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/2671\/9576\/files\/ContainerBridge_0441327d-2e36-4b2a-afec-6ee4ab71dd85.jpg?v=1759284046"}],"url":"https:\/\/store.qvest.co.nz\/collections\/glensound-amplifiers.oembed","provider":"Qvest Store New Zealand","version":"1.0","type":"link"}