ADTECHNO - HDMI Receiver 1080P:60m

The ADTECHNO HD-06RX is the display-end receiver for the ADTECHNO HD-06 HDMI extension system. Paired with the HD-06TX transmitter, it receives video and audio over a single Cat5e or Cat6 cable and delivers the signal through an HDMI output to a display or projector. The system supports distances of up to 60 metres for compatible Full HD signals and 30 metres for 4K UHD at 60 Hz.

Its 10.2 Gbps signal path supports 4K60 at 4:2:0, alongside HDCP 1.4/2.2 pass-through and compatible 3D, Deep Color, CEC and multichannel audio formats. Bidirectional infrared and full-duplex RS-232C pass-through support control of equipment at either end of the installation, reducing the need for separate long-distance control cabling.

Bidirectional Power over Cable means the transmitter and receiver can share one AC adaptor connected at either end. This is useful where a convenient power outlet is available only at the source or display location. The compact aluminium housing and screw-lock DC input make the receiver practical for mounting near projectors, behind displays or within installed AV equipment. Typical applications include classrooms, conference rooms, digital signage and lecture theatres.

KEY SPECIFICATIONS
- Function: HDBaseT receiver; requires HD-06TX transmitter, sold separately
- HDBaseT input: 1 x RJ-45
- HDMI output: 1 x Type A
- Maximum extension: 60 m at 1080p60; 30 m at 4K UHD 60 Hz
- Maximum bandwidth: 10.2 Gbps
- 4K60 chroma format: 4:2:0
- HDCP: 1.4 and 2.2 pass-through
- EDID: Bypass
- Equalisation: Automatic
- IR: Bidirectional, 20–60 kHz; IR input and output on 3.5 mm connections
- Serial control: Full-duplex RS-232C, up to 115,200 bps
- Power over Cable: Bidirectional
- External power: 12 V DC, 1.5 A adaptor
- Maximum system consumption: 8 W for transmitter and receiver together
- Dimensions: 99 W x 74 D x 18 H mm, excluding protrusions
- Weight: Approximately 130 g
- Operating temperature: 0–40°C
- Operating humidity: 20–90%, non-condensing

INSTALLATION NOTES
The HD-06RX is a receiver, not a complete transmitter/receiver kit. It requires a compatible HD-06TX at the source. Use a direct HDBaseT cable connection rather than a standard Ethernet switch. Maximum reach depends on signal format, cable quality and installation conditions. ARC is not supported. IR and RS-232C accessory cables are sold separately.