ADTECHNO - HDMI Transmitter 1080P:60m

The ADTECHNO HD-06TX is the source-end transmitter for an HDBaseT HDMI extension system. Used with the matching HD-06RX receiver, it carries HDMI video and audio over a single Cat5e or Cat6 cable, extending a compatible Full HD signal up to 60 metres or 4K UHD at 60 Hz up to 30 metres. It connects to a source such as a computer, media player or Blu-ray player, with the receiver positioned beside the remote display or projector.

The 10.2 Gbps connection supports 4K60 at 4:2:0, HDCP 1.4/2.2 pass-through and compatible 3D, Deep Color, CEC and multichannel audio signals. Bidirectional infrared and full-duplex RS-232C pass-through allow control signals to travel alongside the video, helping simplify installations where source and display equipment are in different locations.

Bidirectional Power over Cable allows one AC adaptor, connected at either end, to power both units through the HDBaseT link. A compact aluminium enclosure aids heat dissipation, while the screw-lock DC connector helps prevent accidental power disconnection. The HD-06TX suits meeting rooms, classrooms, lecture theatres, digital signage and other fixed AV installations.

KEY SPECIFICATIONS
- Function: HDBaseT transmitter; requires HD-06RX receiver, sold separately
- HDMI input: 1 x Type A
- HDBaseT output: 1 x RJ-45
- Maximum extension: 60 m at 1080p60; 30 m at 4K UHD 60 Hz
- Maximum bandwidth: 10.2 Gbps
- 4K60 chroma format: 4:2:0
- HDCP: 1.4 and 2.2 pass-through
- EDID: Bypass
- IR: Bidirectional, 20–60 kHz; IR input and output on 3.5 mm connections
- Serial control: Full-duplex RS-232C, up to 115,200 bps
- Power over Cable: Bidirectional
- External power: 12 V DC, 1.5 A adaptor
- Maximum system consumption: 8 W for transmitter and receiver together
- Dimensions: 99 W x 74 D x 18 H mm, excluding protrusions
- Weight: Approximately 110 g
- Operating temperature: 0–40°C
- Operating humidity: 20–90%, non-condensing

INSTALLATION NOTES
The RJ-45 connection is a point-to-point HDBaseT link, not a connection through a standard Ethernet switch. Maximum reach depends on signal format, cabling and installation conditions. ARC is not supported. IR and RS-232C accessory cables are sold separately. Confirm source and display compatibility when designing the system.

*Optional accessories are sold separately unless stated.